Tibbo DS100 - Default Chapter; Table of Contents

Table of Contents
1. Introduction 3
1.1. What is WinSock? 3
1.2. Required tools 3
2. Preparing the DS100/EM100SK 4
2.1. Connecting cables 4
2.2. Choosing an IP-address 5
2.3. Installing the HyperTerminal 7
2.4. Setting up the HyperTerminal 8
2.5. Setting up the DS100/EM100SK 9
2.6. Testing the LAN link 10
3. Creating the WinSock Demo 12
3.1. WinSock Demo action plan 12
3.2. Step 1: creating a simple UDP/IP
Demo
12
3.3. Step 2: learning to control the DS100/EM100 over the network 15
3.4. Step 3: TCP/IP communications 18