Danger!
In this case, stop driving immediately.
If you encounter any of the following situations while driving, stop driving immediately and
contact your nearest branch or service center for proper measures. If you provide pictures and
videos to get accurate diagnosis, professional counseling is available.
*Unusual heating of the motor
*Brake braking status error
*Error messages on the instrument cluster
*When the throttle is returned to its original position
*Abnormal noise if generated
*Product smoke, ignition, sour odor
*When rain or wet with water or in a small situation
*When other driving is judged to be unreasonable.
09. Maintenance
1) Maintenance and self-maintenance
Electric products can be damaged by various factors. The life span of each part varies
depending on driving habits and driving environment. Parts that exceed the service Life may
cause accidents. Let's manage various parts and prevent safety accidents in advance.
Step1: Check the replacement timing of consumable parts
①
The components and suspension, tires, tubes, wheels, bearings, headset bearings, discs,
brake pads, cables and folding parts, various brackets and other consumable parts require
periodic inspection and always check.
Step2: External damage inspection by driving environment.
①
Replace parts that may be damaged by external driving environment, such as deformation of
parts, cracks due to compression, and signs of exceeding fine gold or life expectancy.
②
If the product is exposed to strong sunlight for a long time, discoloration may occur.
③
In case of heavy driving such as normal jumps, slight impacts such as turning, collision, etc.,
when driving frequently or for a long time in a poor road condition or driving for thousands of
kilometers or more, fatigue breakdown phenomena. Please check and replace the parts
replacement schedule for each product for safety.
④
Fatigue breakdown and maintenance parts may differ from the example conditions
depending on the driving environment and the operating conditions. Also check parts other
than the replacement cycle (maintenance parts) at all times to check for any signs of
abnormality.
13
To Next Page
Loading...