Need help?Do you have a question about the Tidel TACC-IIa and is the answer not in the manual?
General| Model | TACC-IIa |
|---|---|
| Lock Type | Electronic |
| Bolt Down Holes | Yes |
| Door Thickness | 0.5 inches |
| Body Thickness | 0.25 inches |
| Material | Steel |
Explains the "click" sound as an indicator of AC power reaching the supply and troubleshooting steps.
Provides steps to clear magazine jams and advises on inspecting for causes of recurring jams.
Describes the vending process, timing disk, sensors, and motor control for A91 units.
Guides on diagnosing issues like continuous motor run, flashing wait lights, or non-running motors.
Covers diagnosis for no LED illumination, no motor activation, and erratic LED behavior.
Provides steps for adjusting the +5VDC output to the specified range, including critical warnings.
Guides on diagnosing and resolving issues where the DOOR light remains illuminated.
Describes the door solenoid's operation, activation noise, and troubleshooting voltage checks.
Guides on diagnosing issues with gears, timing disks, sensors, and motors during vending.
To Next Page
