Need help?Do you have a question about the Tidland Performance Series and is the answer not in the manual?
General| Brand | Tidland |
|---|---|
| Model | Performance Series |
| Category | Industrial Equipment |
| Language | English |
Procedures for handling and unpacking the equipment upon arrival.
Identification and description of the parts of the knifeholder.
Technical specifications for different classes of knifeholders.
Guidance on choosing between tangent and wrap slitting methods.
Recommended setback distances for tangent slitting based on product.
Step-by-step instructions for mounting with manual lock.
Step-by-step instructions for mounting with pneumatic lock.
Instructions for mounting using the Easy Glider linear bearing system.
Guidance on recommended and maximum operating air pressures.
Setup and operation procedures for the knifeholder.
Correct orientation of the cant key for proper slitting.
Daily maintenance checks and cleaning procedures.
Weekly maintenance tasks including air pressure and hose checks.
Procedures for installing a new or reinstalling an existing blade.
Common problems and solutions related to slit quality.
Troubleshooting issues related to knifeholder operation and movement.
Detailed steps for removing the knifeholder from the guide bar.
Diagrams identifying sub-assemblies for Class I and Class II/III knifeholders.
Disassembly and reassembly procedures for manual lock guide bar mounts.
Disassembly and reassembly procedures for pneumatic lock guide bar mounts.
Lubrication and Loctite application chart for Class I knifeholders.
Lubrication and Loctite application chart for Class II and III knifeholders.
Illustrated parts breakdown for the Class I manual control body.
Illustrated parts breakdown for Class II and III manual control bodies.
Illustrated parts breakdown for the Class I manual swing cartridge.
Illustrated parts breakdown for Class II and III manual swing cartridges.
Compatibility chart for blade cartridges and control bodies, Class I.
Compatibility chart for e-knifeholders with Class II and III.
To Next Page