Tieline Commander G3 TLR300

To Next Page

TLR300 Rack Unit Mixer-CODEC

and TLR303 Front Panel

Reference Manual

(Incorporating the TLG3 Graphical User Interface)

Commander G3 Rack Unit Reference Manual Version 4.1

Software Version: Tieline Toolbox V.4.14.48 RPTP version 104

Firmware Version: 1.6.72; RPTP version 104

November, 2012

IMPORTANT: Please read page 2 for important

firmware update information

ToolBox Software Note: We recommend using a LAN or serial connection

when installing ToolBox G3 software on operating systems other than

XP. Please read http://www.tieline.com/Support/toolbox-G3

before

attempting to connect ToolBox via USB.

Need help?

Do you have a question about the Tieline Commander G3 TLR300 and is the answer not in the manual?

Tieline Commander G3 TLR300 Specifications

General

Network Interfaces	Ethernet
Power Supply	12V DC
Protocols	RTP, HTTP
Sample Rates	48kHz
Ethernet Ports	1
USB Ports	1
GPIO	4 x GPIO (General Purpose Input/Output)
Audio Codecs	MPEG Layer II, Tieline Music
Audio Inputs	2 x XLR
Audio Outputs	2 x XLR, 1 x AES/EBU