Need help?Do you have a question about the TiEmme SY250 and is the answer not in the manual?
Details of main board connections, inputs, and outputs for correct installation.
Description of safety high voltage inputs, encoder, and pellet level input functions.
Details on thermocouple, boiler probe, and pressure sensor analogue inputs.
First user menu for boiler thermostat, visualizations, and combustion power settings.
Second user menu for heating power, thermostats, and chrono settings.
Access to technical parameters for auger, fan, and thermostat settings.
Instructions for connecting the remote keyboard using RS485 protocol.
Menu options for room thermostat, chrono, time, language, and keyboard settings.
Details on preheating, preload, fixed, and variable ignition phases.
System state for normal operation after ignition and stabilization.
System state when safety limits are reached or errors occur.
Setting automatic combustion power based on temperature and boiler settings.
Correcting auger times and combustion fan speed with step adjustments.
Setting up and configuring the primary air flow sensor for regulation.
List of system inputs with their types, ranges, and connections.
List of system outputs with their types, loads, and connections.
General| Mounting | Panel Mount |
|---|---|
| Input Type | Thermocouple, RTD |
| Output Type | Relay, SSR |
| Power Supply | 24VAC/DC, 100-240VAC |
| Display | LED |
| Communication | RS485 |
| Control Mode | PID |
To Next Page
