What to do if TIF 9055 displays 'ERROR'?
If the TIF Measuring Instruments displays 'ERROR', it means you're trying to enter a weight that's larger than what's available. To fix this, double-check the maximum weight that the instrument can handle.
Why TIF 9055 Measuring Instruments display doesn't change when weight is removed or added?
If the display of your TIF 9055 Measuring Instruments doesn't change when weight is removed or added, the unit might be in Set or Pause Mode. Verify the mode by checking the enunciators on the device.
What to do if CANCEL function does not work on TIF Measuring Instruments?
If the CANCEL function on your TIF Measuring Instruments isn't working, it's likely because the unit is in Auto mode. Check to see if the Auto enunciator is active.
Why REPEAT Key does not work on TIF Measuring Instruments?
If the REPEAT key on your TIF Measuring Instruments isn't working, it's probably because no program has been set. To resolve this, enter a programmed amount.
What to do if cannot program TIF 9055 Measuring Instruments?
If you can't program your TIF Measuring Instruments, it might not be in Set Mode. Check the device for the 'Set' enunciator to confirm.
What to do if GO Key does not function on TIF 9055?
If the GO key isn't functioning on your TIF Measuring Instruments, it's likely that no program has been set. Review section 5.4-5.7.
How to fix (-------) appearing on TIF Measuring Instruments display?
If you see (-------) on the display of your TIF Measuring Instruments, it means the 9V battery is dead. Replace the battery to fix this.
Why I cannot enter some numbers when programming TIF 9055 Measuring Instruments?
If you cannot enter some numbers when programming your TIF Measuring Instruments, the entries are invalid. Review valid entries in section 5.4-5.7.
General| Range | 0 to 220 lbs. (0 to 100Kg) |
|---|---|
| Accuracy | +/- 0.5% of reading |
| Resolution (Normal mode) | 0.2 oz./0. 010 lbs./ 4 grams |
| Resolution (Low Resolution mode) | 1.0 oz./.050 lbs./ 20 grams |
| Power Supply | Four “AA” and one 9V battery |
| Battery Life (9V) | 30 hours |
| Battery Life ("AA") | 100 hours |
| Max. Solenoid operating pressure | 500 psi |
| Operating Temp. | 32ºF to 120ºF (0 ºC to 49ºC) |
| Inlet/Outlet Charging Ports | 1/4" MFL fittings with 1/2" ACME adapters |
Weight and Dimensions| Dimensions | 16.5" x 11.75" x 2.75" (41.9cm x 29.8cm x 6.9cm) |
|---|---|
| Weight 0 to 220 lbs. (0 to 100Kg) | 8.7 Lbs. (3.9 kg) |
To Next Page