What to do if my Tiger Other rotor does not turn?
If the rotor of your Tiger Other isn't turning, the discharge might be obstructed. Use a branch or similar object to clear the discharge. Alternatively, the rotor itself may be plugged; in this case, you should clear the rotor.
Record the machine's unique serial number for registration and warranty purposes.
Instructions on engine oil and petrol types and quantities for the chipper.
Recommended maximum tyre pressure for safe operation.
Guidance on engine maintenance, referring to the engine manual.
Steps to attach the discharge chute using bolts and nuts.
Instructions for attaching the wheel and axle assembly to the chipper body.
Defines the proper applications and limitations for the chipper.
Requirements for operators to be fully instructed before use.
General safety rules including personal protective equipment and machine operation.
Step-by-step guide to safely start the chipper engine and engage the rotor.
Instructions for safely stopping the engine and rotor.
Guidelines for balance, footing, feeding material, and handling foreign objects.
A table outlining maintenance tasks and their frequency.
Process for turning or removing and sharpening chipper blades.
Instructions for inspecting, turning, or replacing shredder knives.
Procedure for adjusting the anvil clearance for optimal cutting.
Visuals and steps for ensuring correct belt tension.
Detailed instructions for removing and installing new drive belts.
List of conditions and damages not covered by the warranty.
Constraints and conditions affecting the warranty coverage.
Duration of warranty coverage for registered and non-registered products.
To Next Page
General