EasyManua.ls Logo

Tiger MCA User Manual

Tiger MCA
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Thank you for purchasing a “TIGER” Stainless Steel Cup.
Please read the instructions completely before use.
Keep these instructions for future reference.
Instructions
Stainless Steel Cup
MCA
MODEL
Stopper
Stopper gasket
Spout
Body
Protective sheet
1 2 3
For the purpose of performance improvement, designs, specifications and
parts shown in this publication are subject to change without notice.
Important!
Keep out of reach of
children.
Noncompliance to this
instruction may result in
scald or injury.
Do not use the product for
any purposes other than
keeping beverages warm
or cold.
Keep the product upright
position all the time.
Do not knock over, drop
or expose the product
to excessive shocks.
Do not put dry ice or
carbonated beverages in
the product.
Do not store milk, dairy
products, or certain fruit
juices in the product.
Do not place the product
near stoves, open flames,
or other sources of
extreme heat.
Do not heat the product in
a microwave oven.
Be sure to set round spout
and stopper in proper
position.
Do not fill the product
above the maximum level
shown below.
Beverage
Maximum
level
Approx.
1cm
1/2-inch
Do not disassemble or
attempt to repair the
product by yourself.
Be sure to clean the
product immediately
specially after sports
drink.
Do not use chlorine-
based bleaches or
cleaner when cleaning
the product.
Do not remove the
protective sheet on the
underside of the
product.
To keep your beverage warm or cool longer.
Pour hot (or cold) water into the body, and let it sit
for one or two minutes to allow the inside of the
body to heat (or cool).
Clean after every use.
Use mild kitchen detergent.
Use a sponge or soft cloth.
Be sure to clean the stopper and gasket every use.
Be sure to wipe off with dry cloth.
Do not use dish washer, dryer and scalder.
Attaching and Removing the gasket
The product rattles when shaken.
This is caused by a metal sheet moving inside the product and it doesn't affect the
performance of the product. The metal sheet is used for boosting the performance
of heat retention.
Stopper
Stopper gasket
Replacing and Purchasing Consumable Parts
The gasket, spout and stopper are consumable parts. Check once a year
for damage/deterioration. If heavily stained or loose, replace them.
For replacement parts, contact customer service or the shop where
you purchased this product.
Before contact customer service
The utmost measures have been taken to ensure the quality of this
product. Should the product be defective, however, contact your
dealer and provide the following information.
1. Product name
2. Model Number
3. Description of trouble
(As detailed as possible)
4. Purchase date
Feel free to send any questions or comments about this product to
the shop where you purchased it.
Specifications
Heat retention has been calculated under the condition of adding hot water
at 95°C ±1°C 203°F±2°F and leaving it in a room temperature of 20°C±2°C
68°F±4°F for 1hour or 6hours.
Cold retention has been calculated under the condition of adding cold water
at 4°C ±1°C 39°F±2°F and leaving it in a room temperature of 20°C±2°C
68°F±4°F for 6hours.
Capacity is actual volume that water can be stored into the product when the
stopper is closed.
Consume beverage within
the day to prevent from
spoiling.
Drink slowly when the
product contains hot
beverage.
Safety Precautions
Safety Precautions
How to Use
How to Use
When you add salty
food and liquid, wash
immediately after
consume.
When removing the gasket, refer
to the illustration.
When attaching the gasket, make
sure to fit the groove in the gasket
completely on to the protrusion on
the stopper.
Content may leak when the gasket
is attached improper position.
MCA
TIGER HANBAI (H.K.) CO.,LTD.
Rm. 1006B, 10/FI., Join-in Hang Sing Centre, 71 - 75 Container Port Road,
Kwai Chung, N.T.
Tel: (852) 2418-0912 Fax: (852) 2418-0911
JAPAN TIGER CORPOTATION OF U.S.A
2730 Monterey Street, Suite 105 Torrance, CA 90503
Tel: (310) 787-1985 Fax: (310) 787-1986
EMAIL: info@japantigercorp.com
TIGER CORPORATION
Head Office: 3-1 Hayamicho, Kadoma City, Osaka 571-8571, Japan
URL : http://www.tiger.jp/global.html
How to Clean
Capacity Heat retention Cold retention
0.25 liters
/ 8.4 oz
Greater than 83°C 181°F (1hour)
Less than 12°C
54°F (6hours)
Greater than 56°C 133°F (6hours)
How to Clean
Question and Answer IconNeed help?

Do you have a question about the Tiger MCA and is the answer not in the manual?

Tiger MCA Specifications

General IconGeneral
BrandTiger
ModelMCA
CategoryToddler feeding
LanguageEnglish

Summary

Safety Precautions

Child Safety

Keep product out of reach of children to prevent accidents.

Beverage Restrictions

Do not use dry ice, carbonated beverages, milk, dairy, or fruit juices.

Heat and Flame Warning

Keep away from stoves, open flames, and sources of extreme heat.

Microwave Use Prohibition

Do not heat the product in a microwave oven.

Fill Level Guideline

Do not fill the product above the indicated maximum level.

Proper Assembly

Ensure the spout and stopper are set in the proper position.

Beverage Consumption

Consume beverages within the day and drink hot beverages slowly.

Intended Use

Use product only for keeping beverages warm or cold.

Physical Handling

Do not knock over, drop, or expose the product to excessive shocks.

Maintenance Prohibition

Do not disassemble or attempt to repair the product yourself.

Cleaning Recommendations

Clean immediately after use, especially after sports drinks or salty liquids.

Cleaning Agent Restriction

Do not use chlorine-based bleaches or cleaners.

Protective Sheet

Do not remove the protective sheet on the underside of the product.

Product Orientation

Keep the product upright position all the time.

How to Use

Pre-heating and Pre-cooling

Pour hot or cold water for 1-2 minutes to improve heat retention.

Rattling Sound Explanation

Rattling is normal due to internal metal sheet for heat retention.

How to Clean

Daily Cleaning

Clean after every use with mild detergent, sponge, or soft cloth.

Cleaning Cautions

Wipe dry; do not use dishwashers, dryers, or scalder.

Attaching and Removing the Gasket

Gasket Installation

Ensure gasket groove fits the stopper protrusion completely to prevent leaks.

Consumable Parts and Service

Consumable Parts Check

Check gasket, spout, and stopper annually for damage or wear.

Contacting Customer Service

Provide product name, model, trouble description, and purchase date.

Specifications

Usage Instructions

Improving Heat/Cold Retention

Pre-heat or pre-cool the body with hot/cold water for better performance.

Rattling Sound Explanation

Rattling is normal due to internal foil for heat retention.

Cleaning and Maintenance

Daily Cleaning Procedure

Clean daily using mild kitchen detergent and a soft sponge or cloth.

Drying and Dishwasher Caution

Dry with a cloth; do not use dishwashers, dryers, or boil.

Gasket Removal and Installation

Correct Gasket Fitting

Ensure gasket groove fits the protrusion on the stopper to prevent leakage.

Consumable Parts and Inquiries

Consumable Parts Check

Check stopper, spout, and gasket annually for wear or stains.

Product Inquiries

Contact customer service with product name, model, and issue details.