Tiger SUMATRAN - Step 2: Base Frame Assembly; Positioning Bearers on Base; Ensuring Frame Squareness; Checking Frame Levelness

Pleaseretaininstruconsforfuturereference
Step 2:
LAY DOWN TANALISED BEARERS AND METAL BAR
• Laydowntanalisedbearersandmetalbar.Metalbarsuppliedwithpre-edtanalisedbearersaached.
(Detail B1)
• Refertotheoorplanofyourconstructdiagram,posionthetanalisedbearersonpreparedbase.
(Detail B2 For Orientaon)
• Measurecornertocornerdiagonallytomakesuretanalisedbearerframeissquare.Ifbothvaluesareequal,
 yourframeissquare.Realigntheoorunlsquare.DO NOT TRIM.
(Detail B3)
• Checkframeislevelusingaspiritlevel.
07
B1
B2
PRE-FITTED
TANALISED BEARERS
METAL BAR
METAL BAR
21
2 1
B3
58
44