Tiger SUMATRAN - Step 3: Building Walls; Placing First Layer of Logs; Securing Logs to Bearers; Fixing Through Half Logs

TIGER SUMATRAN SHELTER GENERAL INSTRUCTIONS
08
gersheds.com 0113 205 4189 sales@gersheds.com
Step 3:
BEGIN BUILDING WALLS
• Place1stlayeroflogsontheedgesofthebearers.Ensurehalflogsareputdownrst.
 Seeconstructdiagramforbuildorder.
• Screwlogsintotanalisedbearersusing3xS80perlog.(1xS80incentre,1xS80perendnotch)
• Forxingthroughnotches.(Detail C1)
• Forxingthroughhalflog.(Detail C2 & C3)
• Checkthatoorislevelusingaspiritlevel.
C1 C2 C3
S80 S80 S80