Tiger TI-02 User Manual

WEIGHING INDICATOR user manual
Please read this manual carefully before operation
----Important safety info
----Operating condition and other attentions
----Guarantee info
Model: TI-02

Tiger TI-02 Specifications

General

Brand	Tiger
Model	TI-02
Category	Accessories
Language	English

Summary

Important Safety And Operation Info

Specifications

Basic Function Operation

Connection of Load Cell and RS232

Basic Parameter Setting

UF-1 A/D Count

Configure Analog-to-Digital converter count for precise measurements.

UF-2 High / Low Limits Setting

Set upper and lower thresholds for weight checks and alarms.

UF-3 Auto-power Off

UF-4 Backlight Setting

UF-5 HOLD Function

UF-6 RS-232 Output

Communication Protocol

UF-7 Speed Setting

UF-8 Zero Tracking

UF-9 G Value Setting

UF-10 Filt Setting

UF-12 Beep Setting

Weight Calibrations

ECF-1 Zero and Span Calibration

Calibrate zero point and span for accurate weight measurement.

ECF-2 Zero Calibration

Perform zero point calibration for the scale.

ECF-3 Span Calibration

Perform span calibration using a known weight.

Guarantee