Tiger WEEDOO - Starting the Boat and Mower

OPERATION
© 2020 Alamo Group Inc.
OPERATION
Weedoo Sickle Bar Mower Operation Section 3-3
STARTING BOAT AND MOWER
Check the operator’s manual received from the boat manufacturer, for their recommendation and procedures
pertaining to your particular make and model.
When mower parts are in motion, serious injury may occur if caution is
not used or danger is not recognized. Never allow bystanders within 60
feet of the machine when mower is in operation.
Be sure the ball valves on the mower hydraulic tank are OPEN before
starting the boat. Serious damage to the hydraulic system can occur if
the valves are not open.
Check to make sure mower switch is in the “OFF” position. The unit is
designed not to start if the switch is in the “on” position. If boat starts
with switch on, turn o󰀨 boat and contact your local Tiger dealership for
assistance.
CAUTION!
WARNING!
WARNING!
WARNING!
WARNING!
Before any operation of boat and mower, the user should read and understand the safety
and operating instructions for both the boat and the mower. The user should also be familiar
with the location and functions of the unit’s instruments and controls. Being familiar with the
machine and its controls will increase e󰀩ciency and reduce possibility of serious injury or
damage to the unit. The operator should work slowly and carefully until he feels comfortable
with the machine. Speed and skill will be attained much easier if the necessary time is spent
to familiarize yourself with the machine and its operations.
Extreme care should be taken when operating near loose objects
such as gravel, rocks, wire, and other debris. Inspect the area
before mowing. Foreign objects should be removed from the site
to prevent machine damage and/or bodily injury or even death.
Any objects that cannot be removed must be clearly marked and
carefully avoided by the operator. Stop mowing immediately if
blades strike a foreign object. Repair all damage before resuming
mowing.