MAINTENANCE
© 2020 Alamo Group Inc.
MAINTENANCE
Weedoo Sickle Bar Mower Maintenance Section 4-9
GREASING BOOM CYLINDER(S) PIVOT POINTS
Locate the zerk on the butt end tang of cylinder and on rod end tang. Inject Lithium-Complex Extreme Pressure
grease conforming to NLGI2-ISO 320 specications until grease begins to protrude from ends. This procedure
is to be used on the main boom cylinder, secondary boom cylinder, mower pivot cylinders daily or at 8 hour
intervals.
To Next Page
Loading...