Need help?Do you have a question about the TikkTokk Little Boss and is the answer not in the manual?
General| Brand | TikkTokk |
|---|---|
| Model | Little Boss |
| Category | High Chair |
| Language | English |
Instructions on securing child with harness buckle, adjusting waist and shoulder straps for comfort.
Identify front foot with symmetrical holes for pedal and frame installation.
Fit rear metal support, then left/right supports, followed by foot support.
Align wooden legs with plastic frame and tighten using provided screws.
Place plastic seat section onto base and lock using safety locks.
Screw foot pads onto each leg, ensuring they are flush with the floor.
Place cover over shell, ensuring the buckle is threaded through the designated hole.
Slide tray onto seat shell by pressing underside buttons simultaneously.
Remove the lower section of the timber legs to convert the high chair to low chair mode.
Check fastenings, use warm water and mild cleaner, avoid corrosive agents and direct sunlight.
Follow instructions, do not leave unattended, secure harness, keep away from hazards, use on flat floor.
Max weight 15kg, keep child in view, do not allow standing, no elevating, no carrying with child.
Stop use if broken, contact for advice, child must sit upright independently.
To Next Page