What to do if TileVision 22" mirror finish TV remote control does not operate a device correctly?
If your TileVision TV remote control isn't operating a device correctly, attempt all the listed codes for the device as shown in the control code PDFs available in the support section of the TileVision website. Alternatively, program the buttons using the device’s original remote control.
What to do if the red light flashes but the TileVision TV does not respond?
If the red light flashes when you press a button, but your TileVision TV or device doesn't respond, make sure the remote control is within three meters of the TileVision TV or equipment and is pointed directly at it.
Why during learning the red light does not flash three times on TileVision TV?
If, during the learning process, the red light doesn't flash three times or stays on for an extended period after pressing a button, it could be due to a full memory or a bad capture. To improve learning, avoid strong ambient light like sunlight or energy-efficient fluorescent lights. Also, try adjusting the position of the remote controls and repeat the procedure.
What to do if the red light does not flash when a programmed button is pressed on TileVision TV remote?
If the red light doesn't flash when you press a programmed button on your TileVision TV remote, it's likely that the button hasn't been programmed or wasn't programmed correctly. You should program the button.
General| Brand | TileVision |
|---|---|
| Model | 22" mirror finish |
| Category | TV |
| Language | English |
Details crucial warnings about electric shock, not opening the unit, and handling with care.
Information on WEEE and RoHS compliance for product disposal.
Covers servicing, unit modification, and general user safety guidelines.
Focuses on safe mains connection and earth requirements for electrical installation.
Guides on unpacking the unit and initial assembly of the back box.
Step-by-step instructions for installing the back box into the wall.
Details mains power requirements and 24V power supply connections.
Instructions for connecting the TV aerial lead.
Guides on installing the supplied stereo speaker and connecting its cable.
Ensuring all required input cables are present and cleaning the flange.
Information on inserting a Conditional Access Module (CAM).
Instructions for making earthing and power socket connections.
Guides for connecting stereo speakers and USB memory stick.
Details all connectors on the base of the unit.
Details all connectors on the side of the unit.
Instructions for connecting the antenna or cable input.
Connecting external devices via HDMI ports.
Connecting a PC using RGB and Audio inputs.
Reference table for SCART connector pin assignments.
Diagram showing SCART pinouts for soldering.
Using IR link for remote control of external equipment.
Details for hotel integration and home automation control.
Step-by-step guide for replacing the battery in the remote control.
Guides for the initial setup and automatic channel tuning.
Instructions for applying sealant to ensure a waterproof seal.
Steps for attaching the cosmetic mirrored acrylic surround.
Guidance on cleaning the screen and surround safely.
Procedure for turning the unit on and putting it into standby mode.
How to change the language for on-screen menus.
How to choose between different input sources like DTV, HDMI, AV.
Enabling or disabling LCN sorting for DTV channels.
Settings for blue screen display and viewing signal strength.
How to view Conditional Access Module (CAM) information.
Configuring the delay for on-screen display information.
Changing the language used for on-screen menus.
Display of channel name and signal info upon channel change.
Viewing extended programme details using the INFO button.
Checking or deleting scheduled recordings or reminders.
Quickly recording the programme currently being viewed.
Accessing and playing back recorded programmes from the PVR list.
Using time shift to pause and resume live television viewing.
Choosing preset picture modes or personalizing settings.
Adjusting contrast, brightness, colour, and sharpness.
Setting the colour temperature for different inputs.
Adjusting noise reduction levels for improved picture quality.
Setting preferred primary or secondary audio languages.
Selecting audio descriptions or specific speaker outputs for DTV.
Enabling or disabling Audio Description (AD) and adjusting its volume.
Activating alternative audio for the hard of hearing.
Setting preferred primary or secondary subtitle languages.
Selecting languages or turning subtitles off via the Subtitles button.
Muting sound and using auto volume to balance programme levels.
Balancing the left and right audio output.
Choosing preset sound modes or personalizing treble and bass.
Adjusting five frequency bands to enhance audio.
Enabling or disabling surround sound effects.
Toggling between AUTO and PCM modes for SPDIF output.
Selecting a city to set the correct time zone.
Configuring the unit to switch to standby after inactivity.
Setting a timer to turn the unit off after a preset time.
Programming the unit to switch off at specific times or days.
Enabling the lock system and setting passwords.
Procedure for changing the default password.
Setting age restrictions for programme viewing.
How to block programmes using the password.
Enabling hotel mode for source listing and preset volume.
Locking or unlocking input sources from the source list.
Setting a default source that the unit will switch to on power-on.
Choosing between DTV or Radio as the default channel type.
Setting a preferred programme number as the default.
Setting the maximum and default volume levels.
Resetting all Hotel Mode settings to default.
Navigating teletext pages and switching modes.
Choosing the preferred language for teletext.
Restoring unit settings to original factory defaults.
Guided process for initial setup and tuning.
How to select and control different devices with the remote.
Procedure for entering device-specific brand codes.
Automatically searching for device control codes.
Manually searching through device control codes.
Specific instructions for entering codes for Sky™ receivers.
Steps for learning and programming remote control buttons.
How to clear programmed buttons for a specific device.
Troubleshooting red/green LED status and remote control malfunctions.
Resolving sound, picture, sync, and Sky receiver integration problems.
Technical details on screen size, resolution, brightness, and power supply.
Details on tuner, audio, connectivity, control, and convenience features.
To Next Page
