Tili MPM3-12HRN1-BH9 User Manual (English)

Questions and Answers:

J
Jonathan HillJul 31, 2025
Why is my Tili MPM3-12HRN1-BH9 Air Conditioner not cool enough?
- J
  jruizJul 31, 2025
  If your Tili Air Conditioner isn't cooling effectively, ensure all windows and doors are closed to keep the cold air in and remove any heat sources from the room. Check that the exhaust air duct is properly connected and not blocked. Also, try decreasing the set temperature. A dirty air filter could also be the culprit; clean it and allow the unit to cool down before switching it back on.
C
codyhuynhAug 4, 2025
What to do if the Tili MPM3-12HRN1-BH9 compressor doesn't work and shows 'P1'?
- K
  kaitlynmcmahonAug 4, 2025
  If your Tili Air Conditioner compressor isn't working and the display shows 'P1,' it means the bottom tray is full. Remove the bottom plug to drain the collected water. If the issue persists after restarting, it is recommended to contact service personnel.
J
James SmithAug 9, 2025
How to fix a Tili MPM3-12HRN1-BH9 that does not start?
- D
  Dr. Christina Shields DVMAug 9, 2025
  If the Tili Air Conditioner does not start when you press the on/off button, it could be due to several reasons. First, check if the water full indicator is blinking, indicating that the water tank is full; if so, empty the water tank. In heating mode, the room temperature may be higher than the set temperature; if so, reset the temperature. In cooling mode, the room temperature may be lower than the set temperature.
B
Brenda BowmanAug 14, 2025
What does it mean when the Tili Air Conditioner cooling light flashes and shows 'E1'?
- S
  samuel41Aug 14, 2025
  If the cooling indicator light flashes at 1Hz and the digital display shows 'E1' on your Tili Air Conditioner, it indicates that the room temperature sensor is off or short-circuited. It is recommended to contact service personnel for assistance.
A
Anthony BarnettAug 19, 2025
What does it mean if FAN light flashes and 'E2' appears on my Tili MPM3-12HRN1-BH9 Air Conditioner?
- J
  John SchmidtAug 19, 2025
  If the FAN indicator light flashes at 1Hz and the digital display shows 'E2' on your Tili Air Conditioner, it means that the Evaporator Temperature Sensor is off or short-circuited. Contact service people to resolve this issue.