Tiltamax Nucleus Nano WLC-T04 User Manual

WLCT04
SINGLE CHANNEL WIRELESS LENS CONTROL
NUCLEUS
Use the included M6 screw to attach the plate to the handle
of the Gravity G2X and the Ronin-S’s M4 screw to attach it
to the handle of the Ronin-S
Loosen the hand-tightened screw of the Handwheel Attachment Plate
Adapter for Zhiyun Crane, then clamp it around the handle of the gimbal.
Tighten the hand-tightened screw to secure the adapter. Then use the
included M6 screw to attach the Handwheel Attachment Plate.
TILTA GRAVITY G2X and DJI RONIN-S
ZHIYUN CRANE
Attaching the Nucleus-Nano
Handwheel Attachment Plate
2
5
Mount the camera with the
attached motor onto your gimbal body
Use a 1/4”-20 screw to attach the gimbal’s baseplate to the
15mm Single Rod Mounting Baseplate.
4
1
2
3
4
Nucleus-Nano Motor x1
Nucleus-Nano Handwheel Controller x1
15mm Single Rod Mounting Baseplate x1
15mm x 100mm Aluminum Black Rod x1
Photo Lens Follow Focus Gear Ring x 2
Handwheel Attachment Plate for G2X and Ronin-S x1
Handwheel Attachment Adapter for Zhiyun Crane x1
Micro USB to Micro USB Nano Motor Power Cable x1
14500 Dual Battery Charger x1
14500 Batteries x2
M4 Allen Key x1
M6 Allen Key x1
User Guide x1
Cardboard Box x1
Packing List：
1
2
2.1
3
3.1
Use 1/4”-20 screw to mount the baseplate to the camera body
Insert the rod into the 15mm Single Rod Mounting Baseplate
Loosen the motor’s hand-tightened screw and attach the motor
to the rod. Rotate the motor so that it rests against the lens’ focus
gear, then tighten the screw.
*Example Shown with
Tilta Gravity G2X
1
5
2
3
4
Attaching the Motor
1

Tiltamax Nucleus Nano WLC-T04 Specifications

General

Model	WLC-T04
Category	Controller
Brand	Tilta
Product Line	Nucleus Nano
Wireless Communication	2.4 GHz
Charging Port	Micro-USB
Battery Type	Lithium-ion

Summary

Attaching the Motor

Mount Camera with Motor to Gimbal

Mount the camera with the attached motor onto your gimbal body.

Attaching the Nucleus-Nano Handwheel Attachment Plate

Tilta Gravity G2X and DJI Ronin-S Attachment

Instructions for attaching the plate to Tilta Gravity G2X and DJI Ronin-S handles.

Zhiyun Crane Attachment

Instructions for attaching the plate to Zhiyun Crane handles.

Attaching the Handwheel

Handwheel Locking Mechanism

Instructions on how to properly insert and lock the handwheel into its plate.

Nucleus-Nano Handwheel Functions

Auto-Calibration

Guides on calibrating the motor to lens range for hard stops or continuous focus.

A-B Range Setting

Process for setting start (A) and end (B) focus marks on the handwheel.

R/S Function

How to use the R/S cable to start/stop camera recording via the motor.

Handwheel Calibration

Procedure for recalibrating the handwheel when motor behavior is erratic.

Wireless Control Assignment

Switching between MASTER and SLAVE modes for wireless control.

Nucleus-Nano Motor Functions

Set the Channel

Adjusting channel numbers on handwheel and motor for communication.