TimberPro HT 260 - Parts Location and Specifications; Specification

Dry weight............................................................................................................6,0 kg
Spark plug ............................................................................................... LD BM6A
Model
.............................................................................................................1E34F
Blade length (from the tip of Gear Case)...........................................................600 mm
Model ..................................................................................................................HT260
19.
Loc
king le
v
er
1. Parts location
1.
F
ront handle
2.
Rear handle
3.
Stop switch
4. Throttle trigger
5. Safety lock
6. Blades
7. Blade guard
T
ype
................................................................................................ double-action type
Engine
Displacement ...........................................................................................
25.4 cm
3
Carburetor ....................................................................................
Diaphragm type
Ignition system ..................................................... I.C.controlled flywheel magneto
Fuel ............................................................................. mixture (Gasoline 40 : Oil 1)
Fuel tank capacity ................................................................................................. 0,6 L
Starter ...................................................................................................... Recoil starter
Clutch .................................................................................................. Centrifugal type
Specifications are subject to change without notice.
2. Specification
8.
Gear case
9.
Star
ter knob
10.
Fuel tank
11. Fuel cap
12. Choke lever
13. Air cleaner cover
14. Spark plug cap
15. Blade cover
16. Operator’s manual
17. Socket
18. Allen key
19
GB 2