To Next PageTo Next Page
Need help?Do you have a question about the Timberwolf TW-HV1 and is the answer not in the manual?
Step-by-step instructions to safely release pressurized hydraulic fluid before maintenance.
Lists essential safety practices like reading the manual and wearing PPE.
Details actions that should NOT be performed, such as splitting non-logs or improper handling.
Continues to list unsafe practices, focusing on pinch points and modifications.
Outlines actions that must NEVER be done, like steadying logs with hands during vertical splitting.
Details rules against operating with others, under influence, or by untrained/underage individuals.
Warns against leaving the log splitter unattended while the motor is running.
Highlights dangers of pressurized fluid leaks and the need to release energy before maintenance.
Lists recommended actions for inspecting hoses, depressurizing, and component replacement.
Details actions to avoid, like adjusting the pressure relief valve or opening the tank cap while hot.
Instructions for checking engine and hydraulic oil levels before operation.
Guidance on choosing a safe location and preparing the machine for use.
Steps for converting the splitter to vertical operation, requiring two people.
Emphasizes operating within the designated 'Operator Zone' and safe log handling.
Warnings about keeping body parts out of the splitting area and using tools for debris removal.
Specific safety advice for splitting logs in the vertical position, including hand placement.
General| Brand | Timberwolf |
|---|---|
| Model | TW-HV1 |
| Category | Log Splitter |
| Language | English |
