Page 5
Section 3 - Front Panel Controls
1) 2 LEDS - A) ON Illuminates when unit is on
B) LOCAL Illuminates when unit is in LOCAL mode
2) 2 PRESS SWITCHES - A) MAINS / ON
B) LOCAL / REMOTE
3) 20 PRESS SWITCHES - Select range, output level and polarity
4) 20 LED STATUS - Indicates range and operating mode.
5) 8 DIGIT LED - Shows output and polarity
6) 3 TERMINALS - Output
7) 2 LEDS - A) REMOTE Illuminates when REMOTE is selected.
- B) DATA Flashes once when a complete command
has been received.
To Next Page
Loading...