4. Specifications
This product complies with: LVD Directive 72/23/EEC.
EMC Directive 89/336/EEC.
and relevant clauses of the
following standards: BS EN 60730-7-2:1992; Particular
requirements. Timers and time switches.
Permissable loads: 13A resistive.
5A inductive.
1000W filament lamps.
500W fluorescent lighting.
100W low energy lamps.
For other loads refer to technical service
on 020-8450-0515.
Operating ambient temperature: 0 to +40ºC.
Operating voltage: 230VAC, 50Hz.
Boost times: 1/4hr, 1/2hr, 1hr, 2hr.
Size: 85mm L x 85mm W x 31mm D.
Front projection: 15 at sides to 22 at centre.
Minimum wall box depth: 25mm.
To Next Page
Loading...
