EasyManua.ls Logo

Time Module VD57C - Cal.VD57 C Movement Specifications; Movement Overview and Dimensions; Technical Movement Features; Battery, Measurement, and Jewels

Time Module VD57C
11 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
[SPECIFICATION]
φ
D)
12H
6H
φ
D)
12H
6H
3 Hands ( Hour , Minute , Second )
Chronograph ( Minute , Second , 1/10 second )
Calendar
Two pole stepping motor
Step motor 3 pieces
Electronic circuit reset switch
Second setting device
[ Time ]
Indicated by the Hour , Minute , Second and Calendar
[ Stop watch ]
Up to 1 minute in 1/10 second ( 2 seconds per round )
Up to 60 minutes in 1 second split time
SR920SW ( SEIZAIKEN ) Silver oxide battery
φ 9.5 × t 2.0 mm
Battery life is approximately 3 years
Use 10-second gate
*Set the winding stem with crown at the normal position
0 Jewel
Total height
Version-01
Outside diameter
Casing diameter
Movement
Movement
    size
( 3H - 9H )
φ29.50 mm
×
26.00 mm
PARTS CATALOGUE / TECHNICAL GUIDE
VD57C
Cal. No.
Item
Cal.VD57C
1
SII Products
Less than ± 20seconds : Monthly rate at normal temperature range
Jewels
Time
indication
Antimagnetic
Measuring gate by
       quartz tester
Battery
Accuracy
1600 A/m
Additional mechanism
Driving System
4.57 mm
×
( 3H - 9H )
φ28.80 mm
× ×

Related product manuals