Time2 Bella - Bella Doorbell Mounting Steps; Marking Screw Holes; Drilling Pilot Holes; Installing the Mounting Bracket

5
Installation
Step 1
Mark screw holes where
you would like to install
the mounting bracket
Step 2
Drill pilot holes.
Use the included wall
plugs if you’re drilling
into stone or hard material
Step 3
Install the mounting
bracket on to the wall
using the provided screws.
To attach Bella, simply slot
it in to the bracket and
click into place
Step 4
Finally, use the provided
security screw to secure
Bella on to the mounting
bracket