6
Wiring an existing doorbell
Step 1
Mark screw holes where you would like
to install the mounting bracket
Step 2
Drill pilot holes.
Use the included wall plugs if you’re
drilling into stone or hard material
Step 4
Install the mounting bracket on to the wall
using the provided screws.
Step 5
Then attach the doorbell by simply
slotting it into the bracket and clicking
into place
Step 3
Connect the wires coming out of your
wall to the screws on the back of the
mounting bracket.
Either wire can connect to either screw
Step 5
Finally, use the provided security
screw to secure the doorbell on to
the mounting bracket
12~24V AC
To Next Page
Loading...