1
1. General Information
These instructions should be read carefully
and retained for further reference and maintenance.
2. Safety
• Before installation or maintenance, ensure the
mains supply to the light switch is switched off
and the circuit supply fuses are removed or the
circuit breaker turned off.
• It is recommended that a qualified electrician is
consulted or used for the installation of this light
switch and install in accordance with the current
IEE wiring and Building Regulations.
• Check that the total load on the circuit including
when this light switch is fitted does not exceed the
rating of the circuit cable, fuse or circuit breaker.
To Next Page
Loading...
