Setting up
• Ensure that the light switch is in the ‘OFF’ position.
• Slide down the front of the cover to expose the
security controls.
• Turn the hours on dial to indicate how many
hours you wish the light to remain on for,
and check the ‘LED window’ is glowing.
• Slide the cover back up.
• The security mode is now set and the light will
automatically turn on at dusk and remain on
for the number of hours you have selected.
This programme will repeat itself every 24 hours.
Note: If you wish to use the security switch
as a normal light switch simply turn the hours
on dial fully anticlockwise, lining up the dot.
If you then wish to use it as a security switch
again please follow the above instructions.
To Next Page
Loading...
Need help?
General
