Need help?Do you have a question about the Timotion TDH18 Desk and is the answer not in the manual?
Secure components to the support beam using the 4mm hex spanner and M6*10 screws.
Connect legs to the frame using M6*14 and M6*12 screws with the 4mm hex spanner.
Fasten frame parts with M8*16 screws and the 5mm hex spanner.
Install rubber cushions and M6*12 screws using the 4mm hex spanner.
Attach tabletop supports using specified screws based on tabletop thickness.
Connect control box, handset, and power cable; note max weight capacity.
Use handset arrow buttons to move the desk up or down.
Save and recall preferred desk height positions using memory buttons.
Reset the desk to its lowest position by pressing up and down arrows simultaneously.
Switch between CM and INCH units via button combinations on the handset.
Set minimum and maximum desk height limits using specific button press sequences.
Insert the Bluetooth dongle into the backside of the handset.
Download, install, and configure the 'STAND UP PLS' app for desk control and data tracking.
View monitoring, activity, and distance data within the application interface.
Modify application settings and preferences via the dedicated settings menu.
Secure components to the support beam using the 4mm hex spanner and M6*10 screws.
Connect legs to the frame using M6*14 and M6*12 screws with the 4mm hex spanner.
Fasten frame parts with M8*16 screws and the 5mm hex spanner.
Install rubber cushions and M6*12 screws using the 4mm hex spanner.
Attach tabletop supports using specified screws based on tabletop thickness.
Connect control box, handset, and power cable; note max weight capacity.
Use handset arrow buttons to move the desk up or down.
Save and recall preferred desk height positions using memory buttons.
Reset the desk to its lowest position by pressing up and down arrows simultaneously.
Switch between CM and INCH units via button combinations on the handset.
Set minimum and maximum desk height limits using specific button press sequences.
Insert the Bluetooth dongle into the backside of the handset.
Download, install, and configure the 'STAND UP PLS' app for desk control and data tracking.
View monitoring, activity, and distance data within the application interface.
Modify application settings and preferences via the dedicated settings menu.
General| Brand | Timotion |
|---|---|
| Model | TDH18 Desk |
| Category | Indoor Furnishing |
| Language | English |
To Next Page