EasyManua.ls Logo

Timpte 718 User Manual

Timpte 718
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
USER GUIDE
UTILITY TRAILERS
Question and Answer IconNeed help?

Do you have a question about the Timpte 718 and is the answer not in the manual?

Timpte 718 Specifications

General IconGeneral
BrandTimpte
Model718
CategoryUtility Vehicle
LanguageEnglish

Summary

Operating Your Timpte Utility Trailer

Connecting the Tow Vehicle

Connect safety cables and breakaway cable to the tow vehicle, crossing safety cables under the hitch.

Jack Operation

Fully raise the trailer jack and remove and stow the jack wheel.

Lowering the Trailer

Preparation and Power Activation

Turn on master switch, release all safety latches, and ensure trailer is on level ground.

Lowering Procedure and Safety

Use remote or keypad to lower. Do not over-run winch. Stay clear of moving parts.

Loading the Trailer

Vehicle Placement and Trailer Raising

Load vehicle forward for 10% tongue weight, then raise trailer to traveling position.

Final Securing and Latches

Ensure lifting arms and safety latches are engaged and latched before towing.

Charging the Battery

Battery Charging and Maintenance

Trailer has trickle charger and solar panel. Turn off master switch when not in use.

Battery Voltage and Safety

Maintain 12.2V-13V. Breakaway switch drains battery for safety.

Timpte Utility Trailers Cargo Loading

Securing Motorized Vehicles

Use wheel tie straps to tie-down rings. Load vehicle forward for 10% tongue weight.

Weight Distribution and Towing Safety

Do not exceed load ratings. Check straps. Ensure 10% tongue load to prevent sway.

Service and Maintenance

Scheduled Maintenance Checks

Check lug nuts, bearings, brakes, tire pressure, and lights regularly.

Towing Safety Precautions

Verify tire pressure, tread, and lug nuts. Ensure safety latches and support are engaged.