Tineco FLOOR ONE SWITCH S7 Series User Manual

55
EN
Brush Roller
Remove the brush roller by grabbing the
brush roller tab and pulling out.
Use the cleaning tool to remove the hair and
debris wrapped around the roller and rinse the
roller with water, and allow it to dry completely
before reinstalling.
Remove hair and debris from the brush roller
chamber and the opening with the cleaning
tool.
Replace the brush roller by inserting its end into
the left side of the holder, then attach the roller
tab to the magnetic buckle on the right side to
lock into place.
Brush Roller Replacement
Pull up the roller handle to remove it. Once
removed, install the handle into the new brush
roller.
When uninstalling, do not directly pull on the
pull ring of the brush roller.
Note:
• A spare brush roller is provided with your appliance for convenient replacement.
• To maintain optimal performance, replace the brush roller every 8 months.
Uninstall Install

Tineco FLOOR ONE SWITCH S7 Series Specifications

General

Brand	Tineco
Model	FLOOR ONE SWITCH S7 Series
Category	Cleaning Equipment
Language	English