To Next PageTo Next PageWhat to do if the tank is full but the air supply doesn't engage on Tippmann A-5 RESPONSE?
If the tank is full but the air supply doesn't engage on your Tippmann Video Gaming Accessories, the pin valve might be too short, or its seal could be damaged. You should check the pin valve length and inspect the pin valve seal for any signs of damage.
Emphasizes user's role in safe marker operation and following instructions.
States Tippmann Sports LLC is not liable for injury from misuse or unsafe handling.
Always handle marker as loaded, keep finger off trigger until ready.
Keep marker on safe, use barrel sleeve, never point at anything unintended.
Mandates wearing protective gear for user and others in range.
Includes battery installation for E-Grip and initial marker prep.
Step-by-step guide to attach and secure the air supply cylinder.
Instructions for loading paintballs and preparing the feeding system.
Procedure for measuring and adjusting the velocity of the paintball marker.
How to choose between different firing modes using the adjustment switch.
Steps to diagnose and resolve issues when the marker fails to fire.
Steps for diagnosing and fixing issues with trigger response.
Procedure to safely unload the marker and remove paintballs.
Steps for safely disconnecting and removing the air supply cylinder.
Detailed instructions for disassembling the marker receiver.
General| Category | Paintball Marker |
|---|---|
| Firing Rate | Up to 15 balls per second |
| Power Source | CO2 or compressed air |
| Trigger | Mechanical |
| Caliber | 0.68" |
