Do you have a question about the Tirol GT02 and is the answer not in the manual?
Provides technical details like dimensions, weight, network, sensitivity, and operating conditions.
Highlights core capabilities such as GSM quad-band frequency and real-time tracking.
Guidance on optimal placement for receiving GPS signals, especially in vehicles.
Detailed instructions on connecting the device's power and relay wiring for proper operation.
Instructions on how to get the device's location by calling or sending specific SMS commands.
Explains the meaning of parameters and codes received in SMS messages from the device.
Procedure to set up authorized phone numbers for receiving alarms and commands from the device.
Configures the device to trigger an alarm when a predefined speed limit is exceeded.
Enables an alert when the device moves beyond a specified radius from its last known location.
Allows setting the device's local time, adjusting for different time zones.
Notifies the user when the device loses power, especially if it has a backup battery.
Triggers an alert when the device's battery level drops below a certain threshold.
Monitors and reports the ACC (ignition) status of the vehicle the tracker is installed in.
Enables remote engine shutdown by cutting off oil or power when the vehicle is at low speed.
Instruction on how to restart the GPS tracker device remotely.
Allows modification of the frequency at which the device sends data to the platform.
Procedure for changing the default password for device access and security.
Resets the device to its original factory configurations and default parameters.
Command to retrieve the device's unique IMEI number for identification.
Instructions on how to modify the device's IMEI number, typically for service or tracking purposes.
Guide for installing and using the mobile application for tracking on Android and iOS devices.
Instructions for accessing tracking data and features through a web-based platform.
Configures the device to connect to alternative tracking platforms using DNS and port settings.
Addresses frequent problems like device not turning on, no GSM signal, or no GPS reception.
Solutions for issues like incorrect SMS commands, no reply to calls, or authorization problems.
Guidance for resolving issues where platform position differs from actual location or GPS signal is poor.