The TIRRITO-Roker 100 is a cordless rechargeable robotic pool cleaner designed for hassle-free use in various pool sizes. Its compact and lightweight design allows it to clean the bottom of a pool without the need for draining the water. The device utilizes intelligent path planning to achieve an effective, deep, and perfect cleaning result.
Function Description:
The TIRRITO-Roker 100 is primarily designed for cleaning flat-bottomed pools. It operates autonomously, moving across the pool bottom to collect debris and sediment. The device is equipped with a filter system that captures garbage, ensuring cleaner water. It features a power button for activation and a charging port for recharging its built-in lithium battery. The device is designed to automatically move to the pool edge and stop working when its battery is low, indicated by a buzzer.
Important Technical Specifications:
- Model: TIRRITO-Roker 100
- Dimensions (L x W x H): 363 x 363 x 212 mm
- Weight: 3.2 kg
- Battery Capacity: 2,600 mAh
- Battery Life: Max. 85 minutes
- Motor Power: 20W
- Charging Time: 2.5 hours
- Power Adapter/Input Voltage: 100-240V
- Power Adapter/Output Voltage: 12.6V
- Power Adapter/Rated Power: 19W
- Operating Temperature: 0 to 35 °C
- Storage Temperature: -10 to 40 °C
- Filter Density: 80μm
- Water Depth Supported: 1-3 m
- Moving Speed: 0.25 m/s
- Waterproof Level: IP68
- PH Value Supported: 7.0~7.8
- Chlorine: Max. 4.0 ppm
- Sodium Chloride: Max. 5,000 ppm
Usage Features:
- Cordless Operation: Eliminates the need for cumbersome cables, offering greater freedom of movement in the pool.
- Intelligent Path Planning: Allows the robot to efficiently clean the pool bottom without human intervention.
- Easy Charging: The device is charged via a dedicated power adapter. It's recommended to charge the device before first use and once a month during idle periods to protect the battery. The charger has an indicator: red for not fully charged, green for fully charged.
- Simple Deployment: To start, turn the device upside down, press the power switch (a long beep and a short beep indicate it's on), place it on its bottom, grab the handle, and gently place it on the water surface. It will automatically sink to the pool bottom.
- Safe Retrieval: A pick-up hook (installed on a pick-up rod) is provided to safely retrieve the device from the pool. Users should ensure the device is turned off when not in use and avoid dragging it too fast.
- Battery Status Indicators: When the battery is low, the device automatically moves to the pool edge and stops, emitting a short beep every 3 seconds. A short, rush, and loud beep indicates the need for immediate charging.
- Safety Precautions: Users are advised to keep humans and animals out of the pool while the device is working and not to leave children unsupervised. The device is not designed for climbing and should be placed in a water area away from steps.
Maintenance Features:
- Filter Cleaning: The device includes a filter that collects garbage. It is crucial to clean or replace the filter if the suction effect weakens due to excessive accumulation of garbage.
- Post-Use Care: After each use, the device should be turned off, rinsed to remove residual pool water and internal waste, and placed in a cool, dry place away from heat sources.
- Drying: After cleaning, it is recommended to dry the device in a cool place for 20 minutes before charging.
- Disassembly for Cleaning: To clean the filter, gently force apart the buckle on both sides, slightly shake the device to separate the stand from the upper body, and lift the upper part. Remove the filter to expose and rinse the garbage. Also, rinse any residual garbage on the stand.
- Battery Protection: To prolong battery life, charge the device once a month during idle periods.
- Internal Components Protection: Avoid covering the device during charging to prevent overheating and damage to internal components.
- Sealed Compartment: The device has a built-in lithium battery within a sealed compartment. Users should not disassemble this compartment without authorization. The device should also be protected from direct sunlight and strong impacts.
Need help?
General
To Next Page