To Next PageTo Next Page
Need help?Do you have a question about the TIS LUNA TFT43 and is the answer not in the manual?
General| Display | TFT LCD |
|---|---|
| Resolution | 480 x 272 pixels |
| Brightness | 400 cd/m² |
| Contrast Ratio | 500:1 |
| Response Time | 20 ms |
| Input Voltage | 24V DC |
| Display Size | 4.3 inches |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C ~ 70°C |
Overview of the Luna TFT panel's features and capabilities.
Detailed technical specifications of the Luna TFT touch panel.
Recommendation to read the manual before installation.
Guidelines for safe installation by skilled persons.
Specifies data cable type, connection method, and electrical wire size.
Information on manual programming, advanced programming, and product warranty.
Describes panel installation method and recommended mounting location.
Instructions for separating the panel cover using a screwdriver.
Guides on separating the main panel and wall base.
Instructions to remove screws from the panel addition cover.
Steps for connecting and assembling the wall base and panel addition.
Warning to turn off the main electrical source before installation.
Instructions for connecting the Cat5e TIS BUS wire.
Details on connecting digital inputs and external IR receiver.
Explains connecting digital inputs and IR emitter probe.
Instructions for connecting digital inputs and IR emitter.
Specific wiring instructions for the IR Emitter probe.
How to connect digital inputs and 12V operated sensors.
Details for connecting 12V sensors like smoke detectors.
Wiring instructions for connecting lights to the 3R-5A panel.
Wiring instructions for connecting shutters or curtains.
Wiring instructions for connecting the FCU.
Wiring instructions for connecting HVAC systems.
Wiring instructions for the AIR-BUS-3W panel addition.
Instructions for mounting the panel using screws on the junction box.
Guide to removing the protective plastic cover.
Instructions for connecting the main panel to the installed part.
Instructions for pushing the bottom part to complete assembly.
Instructions for turning on the panel after installation.
Press button for 6s for LED to blink, initiating pairing.
Short press on panel button or wall switch to connect to dry inputs.
Test ON/OFF by short press, dimming by long press.
Long press icon for 12s to change icon and comment.
Choose OFF/ON icons, type comments, and save.
Long press lights icon for 5s to show/hide pages.
Press and hold the first Channel L button for 6s.
Turn the AC ON on the Luna AC page.
Test fan speed changes to verify relay response.
Change C/F, fan speeds, AC moods via AC menu icon.
Long press AC icon for 5s to show/hide pages.
Press PRG button for 6s until green LED is steady.
Turn the AC ON on the Luna AC page.
Test mood, heat/cool, fan speed changes.
Change C/F, fan speeds, AC moods via AC menu icon.
Long press AC icon for 5s to show/hide pages.
Press button for 6s for LED to blink, initiating programming.
Turn the floor heating ON on the Luna floor heater page.
Test temperature changes to verify relay response.
Long press AC icon for 5s to show/hide pages.
Long press PRG buttons on Audio Matrix for 8s.
Press play button on radio or USB/SD card source.
Check amplifier reaction to panel commands.
Change treble, bass, volume, play mode via Audio menu.
Enable/disable SD, USB, FM radio, auxiliary inputs.
Set light brightness, ON/OFF, and RGB color.
Set desired Air condition and floor heating settings.
Set favorite music or radio channel at specific volume.
Long press mood icon for 12s to program.
Select page settings (lights, RGB, AC, music) and save.
Test the programmed scene with a single press.
Go to the Security page.
Press Extra icon for 5s to reveal new page.
Short press or long press Change Password to modify.
Type the old password to proceed.
Type the new password and save.
Press and hold middle IR buttons for 8s.
Change background color, brightness, and default page settings.
Press Clean Screen to disable touch for 30 seconds.
Long press panel address for 6s to change Subnet/Device ID.
Navigate lights pages and control lights via icons.
Short press for ON/OFF or scene, long press for dimming.
Double tap to trigger a special programmed scene.
Control RGBW color and save favorite colors.
Navigate AC and floor heater pages, control ON/OFF.
Increase/decrease temperature, change fan speed and AC modes.
Set AC timer, control floor heating ON/OFF and temperature.
Select music source: SD, USB, FM Radio, Auxiliary, TV.
Play album/track, increase/decrease volume.
Scan channels by pressing and holding the scan button.
Play, stop music from auxiliary inputs.
Send IR commands to control the TV.
Arm system for vacation, away, night, day modes or disarm.
Press and hold panic button for 3s to activate alarm.
Monitor/control curtain motors, weather, energy meter, security, sensors.
Use IR remote to control AC, floor heater, music, curtains, security.
Panel displays urgent messages with buzzer and LCD screen.
Addresses panel address conflicts in the TIS network.
Checks TIS-BUS power or 24V power supply.
Identifies TIS-BUS connection issues or disabled programming.
Addresses TIS-BUS connection problems or faulty programming address.
Explains password lock and how to reset if forgotten.
Addresses music stopping and changing Play Mode to Play All.
