Tissot PRX Digital - SPLIT (Split Timing); Using the SPLIT Chronograph

SPLIT
12 / 19 24.07.2023
SPLIT
Timing in SPLIT mode (split times)
Information
The SPLIT function is a chronometer for measuring the total duration of a race for up
to 99runners or vehicles participating in the same timed event.
For example: measuring the finish time for several runners in a 100-metre sprint.
Measurement range
Maximum measurement time
Measurement resolution (less than 1 hour)
Measurement resolution (more than 1 hour)
100 days
1/100''
1''
Minutes-seconds-hundredths display Hours-minutes-seconds display
Use
1 Select SPL chrono
To be able to select the SPLIT function, the LAP
chrono needs to be reset and vice versa
2 Start timekeeping
The first split time is measured
3 Timing in SPLIT mode
As each runner passes, press to record their time
The recorded time flashes on the display for
3seconds, then the current timing is displayed again
4 When the last runner passes, stop timekeeping