Tissot PRX Digital - AL (Alarm); Setting the Alarm

AL
16 / 19 24.07.2023
AL
The watch is equipped with an alarm function that beeps at the set time.
How it works
At the set time (relative to T1), a beep will sound for 30 seconds, and the display will
flash until the alarm is cleared.
General information
• There is no alarm snooze feature.
• The alarm is deactivated for:
• setting the time T1;
• setting the alarm;
• the watch is in deep power save mode after manually entering this mode
Setting
1 Select AL
2 Enter setting mode
The whole screen flashes once, then the hour flashes
3"
3 Adjust the value
+
-
4 Confirm and move on to the next setting
The minutes flash