2
IMPORTANT SAFETY INFORMATION
THESE ARE STANDARD PRACTICES THAT MAY NOT APPLY TO THE PRODUCTS DESCRIBED IN
THIS MANUAL.
SAFETY AT ALL TIMES
Thoroughly read and understand the instructions given in this manual before operation. Refer to the
“Safety Label” section, read all instructions noted on them. Do not allow anyone to operate this
equipment who has not thoroughly read and comprehended this manual. Do not allow anyone who
has not adequately trained in the safe operation of the equipment.
• The operator should be familiar with all functions of the unit.
• Operate implement from the driver’s seat only.
• Make sure all guards and shields are in place and secured before operating the tool.
• Do not leave a tractor or implement unattended with the engine running.
• Dismounting from a moving tractor could cause severe injury or death.
• Do not allow anyone to stand between tractor and implement while backing up to
implement.
• Keep hands, feet, and clothing away from power-driven parts.
• Wear snug-fitting clothing to avoid entanglement with moving parts.
• Watch out for wires, trees, etc., when raising implements. Make sure all persons are clear of
the working area.
• Turning the tractor too tight may cause implement to ride upon wheels. This activity could
result in injury or equipment damage.
• Do not carry passengers on the tool at any time.
LOOK FOR THE SAFETY ALERT SYMBOL
The SAFETY ALERT SYMBOL indicates a potential hazard to personal safety, and individuals must
take safety precautions. When you see this symbol, be alert and carefully read the message that
follows it. In addition to the design and configuration of equipment, hazard control and accident
prevention depend on the awareness, concern, prudence, and proper training of personnel involved
in the operation, transport, maintenance, and storage.
To Next Page
Loading...