Titan Controls Atlas 2 User Manual

Atlas 2®
• Warnings
• Atlas 2®–Preset CO2 controller Overview
• Instructions for Operation
• Calibration Mode
• Error Mode
• Controller Specications
• Installation Examples
• Warranty Information
• Service and Repair Program
Warnings:
• Read all instructions before operating controller.
• Do not put your controller in an area where it can get wet or sprayed.
• Mount your controller securely to the wall using hardware provided.
• When using “bug bombs” in area, cover controller completely to avoid corrosion.
• Do not put paperclips, tools, etc. into unit. Possible electrocution may occur.
• Make sure to verify the voltage, amperage and hertz of the power source prior to plugging in
and activating the controller.
• Check that all devices that will be activated by this controller are the proper voltage.
• This controller is designed for ‘Inside Use’ only.
• Avoid placing the controller near heat generating sources.
• Use caution when operating controller in extremely humid environments.
• Do not use controller for purposes other than the unit was designed to function.
• Use controller within dened environmental specications.
• Ask your Dealer for tips and techniques regarding the use of this controller.
• Be conscientious when disposing of any products.
• Enjoy your Titan Controls® CO2 controller for years to come!
Atlas 2® Preset CO2
Monitor/Controller Overview:
The Titan Controls® Atlas 2® CO2 preset CO2 controller monitors, maintains and displays the
CO2 concentration in your growing environment. The CO2 readings are displayed by four
green LED’s, with each LED indicating a minimum CO2 concentration. The Atlas 2® is equipped
with a photocell, LED display and a one button calibration that calibrates the Atlas 2® to the
approximate concentration of outside air.
WARRANTY SERVICE: Please read warranty information first.
If after reviewing the troubleshooting tips the unit will still not work, you should return it to the
Dealer where you purchased the controller. They will be able to further evaluate the unit and test
its various components and quite possibly will be able to identify and/or x any problems. If the
Dealer is unable to x the unit, they will return it to us for factory repair.
If there are no Dealers in your area, you may contact us directly for technical support. If we can-
not help you resolve the problem over the phone, we will issue you a RMA # (return merchan-
dise authorization) authorizing you to return the unit to us for factory reconditioning (if the unit
is under warranty). Contact the number below for a RMA and shipping address. Complete the
form below and include it with your unit. Also please write the RMA # on the outside of the box.
Please package the unit in its original packaging. If it is damaged in shipment we cannot be
responsible.
Once we receive the unit back, we will repair the controller within 48 hours (business) and return
it to you freight prepaid via UPS ground shipment.
Include the following if returning directly to Titan Controls®
• Proof of purchase • This completed form • RMA # on the outside of the box
Return Merchandise Authorization Number (Required)
Company Name: ____________________________________________________________________________________
Contact Name: _____________________________________________________________________________________
Address: __________________________________________________________________________________________
____________________________________________________________________________________________________
Phone #: ___________________________________________________________________________________________
Email address: _______________________________________________________________________________
What is the nature of the problem? ______________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
Send to your nearest location – shipping address will be given when the RMA # is issued.
www.titancontrols.net
For technical assistance call us at 1-888-80-Titan or 1-888-808-4826.
®

Titan Controls Atlas 2 Specifications

General

Brand	Titan Controls
Model	Atlas 2
Category	Test Equipment
Language	English