Titan 200 - Page 2

STANDARD FEATURES
 2.5” HF4 Thin Film Composite (TFC) Extra Low Energy Membrane
 2.5” Champ PVC Membrane Housing
 Aquatec 8800 Booster Pump 110/220 VAC & Transformer
 5 Micron Sediment Prefilter
 Carbon Block Cartridge
 GAC Polishing Filter
 Wall Mount Bracket
 Solenoid Valve
 20-40 psi Tank Switch
 Auto-Flush
 Pump Pressure Gauge
MODELS
Titan 200 Titan 300
Design
Wall Mount Wall Mount
Gallons Per Day
200 300
Nominal NaCl Rejection
98% 98%
Recycle Line
N/A N/A
Recovery
40% - 50% 40% - 50%
Element Size (in)
HF4 - 2514 HF4 - 2521
Number of Elements
1 1
Feed-Product-Waste
¼” - ¼” - ¼” ⅜” - ⅜” - ¼”
Pump
1 - 8800 Booster Pump 2 - 8800 Booster Pump
Hertz
50/60 50/60
Voltage (VAC)
110/220 110/220
Dimensions W x L x H (in)
7” x 21.5” x 33” 7” x 28” x 33”
Weight (lbs.)
45 lbs. 50 lbs.
* Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
† Membrane approximate initial capacity based on properly pretreated feed water of 550 PPM TDS as NaCl, 77°F (25°C), Silt Density Index below 5,
and 60 psi feed pressure while supplying water to atmosphere. Productivity will vary depending on the feed water conditions.
SAMF-109 Rev. A 12/08/08
2