Titan 200 Series - User Manual

Titan 200 Series

14 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

THE RAMP RACK 200 SERIES

PU-200

900008

Operator’s Manual

Read the Operator’s Manual entirely. When you see this

symbol, the subsequent instructions and warnings are

serious follow without exception. Your life and the lives

of others depend on it!

Table of Contents

PU-200 9000081
ASSEMBLY INSTRUCTIONS – PU-2002
PARTS GUIDE8
ASSEMBLY INSTRUCTIONS - QD-10011
1. Insert the custom jack into the adjustable hitch “A” frame and secure with jack mounting bracket and (2) ⅜” x 1½” carriage bolts and (2) ⅜” flange nuts. Ensure this is tightened down well to prevent your jack from slipping.11
2. Attach the jack handle plate to the side of dovetail and secure with (2) ⅜” X ¾” bolts and (2) ⅜” flange nuts.11
3. Insert jack handle extension through the jack handle plate and onto the jack. Secure with (1) ¼” x 1¼” bolt and (1) ¼” lock nut through the pre-drilled hole. A hammer can be helpful to get the jack handle extension onto the jack. The handle should ...11
4. Attach a turnbuckle to each side of the dovetail using (2) 5 /16” lynch pins on each.11
5. Remove the ⅜” x 2½” flange bolts on the dovetail and replace with the hitch pins w/chain.11
PARTS DIAGRAM / EXPLODED VIEW12
ACKNOWLEDGEMENT OF RISK AND RELEASE OF LIABILITY13
TITAN LIMITED WARRANTY: TERMS, EXCLUSIONS AND LIMITATIONS OF REMEDIES13

Need help?

Do you have a question about the Titan 200 Series and is the answer not in the manual?

Titan 200 Series Specifications

General

Brand	Titan
Model	200 Series
Category	Industrial Equipment
Language	English

Related product manuals

Preview: Titan 200

Preview: Titan MAX

Preview: Titan VS-32-L