Need help?Do you have a question about the Titan SCR2 Series and is the answer not in the manual?
General| Brand | Titan |
|---|---|
| Model | SCR2 Series |
| Category | Water Heater |
| Language | English |
Attaching mounting brackets to the heater for secure wall installation using the provided kit.
Guidelines for copper pipes: flush lines, avoid Teflon tape on fittings, and use shut-off valves.
For Pex/CPVC: use 36" copper pipe and install a pressure relief valve on the inlet.
Ensure power is off, ground unit, tight connections, correct breaker size, and water circulation before energizing.
Install in dry area near demand, avoid outdoors, and maintain 12" clearance from top and bottom.
Explains Voltage, Current, Power, and Temperature display modes for monitoring unit performance.
Details using Red button to increase and Blue button to decrease water temperature.
User agrees to terms, emphasizing reading warnings before installation and use.
Manufacturer not liable for damages; liability limited to repair or replacement of the unit.
Advice on water quality, sediment, galvanic corrosion, and importance of professional installation.
Instructions for activating the 10 Year Limited Warranty by mailing the certificate within 30 days of purchase.
To Next Page
