Need help?Do you have a question about the Titan TAC-2T and is the answer not in the manual?
Explains DANGER, WARNING, CAUTION, NOTICE symbols used for hazard recognition in the manual.
Provides a basic overview of the air compressor's function and operational requirements.
Lists essential safety rules for operating the compressor and its high-pressure system.
Instructions for careful inspection of the compressor after transit and before initial use.
Outlines daily, weekly, and monthly maintenance tasks for the compressor.
Details on lubricating the compressor and attaching components like rubber feet.
Explains the function of key operational parts like the regulator, safety valve, and check valve.
Step-by-step guide for preparing and starting the compressor engine and pump.
Essential checks before starting the engine, including air filter, oil, and safety valve.
Procedures after use, including draining tanks and inspecting for damage.
Steps for adjusting belt tension and alignment for optimal performance.
Recommendations for properly storing the compressor in a cool, dry place.
Instructions for setting the fuel valve and choke lever for cold and warm starts.
Details on setting the throttle lever and turning on the engine switch.
Guide to using the recoil starter grip and adjusting the choke as the engine warms.
Step-by-step instructions for checking the engine oil level using the dipstick.
Procedure for safely draining old oil and refilling with recommended oil.
Explains DANGER, WARNING, CAUTION, NOTICE symbols used for hazard recognition in the manual.
Provides a basic overview of the air compressor's function and operational requirements.
Lists essential safety rules for operating the compressor and its high-pressure system.
Instructions for careful inspection of the compressor after transit and before initial use.
Outlines daily, weekly, and monthly maintenance tasks for the compressor.
Details on lubricating the compressor and attaching components like rubber feet.
Explains the function of key operational parts like the regulator, safety valve, and check valve.
Step-by-step guide for preparing and starting the compressor engine and pump.
Essential checks before starting the engine, including air filter, oil, and safety valve.
Procedures after use, including draining tanks and inspecting for damage.
Steps for adjusting belt tension and alignment for optimal performance.
Recommendations for properly storing the compressor in a cool, dry place.
Instructions for setting the fuel valve and choke lever for cold and warm starts.
Details on setting the throttle lever and turning on the engine switch.
Guide to using the recoil starter grip and adjusting the choke as the engine warms.
Step-by-step instructions for checking the engine oil level using the dipstick.
Procedure for safely draining old oil and refilling with recommended oil.
General| Brand | Titan |
|---|---|
| Model | TAC-2T |
| Category | Air Compressor |
| Language | English |
To Next Page
