What to do if the Titan TI-7700 Massager remote control works, but the chair is not functioning?
If the remote control of your Titan Massager is working, but the chair itself isn't functioning, it might have overheated from extended use. To resolve this, switch off the power and let the chair cool down for about 30 to 50 minutes.
What to do if both the remote control and the Titan TI-7700 chair are not functioning?
If neither the remote control nor the Titan Massager chair are functioning, try these steps: 1. Ensure the chair is connected to a working power outlet. 2. Switch the power OFF and then turn it ON again.
How to troubleshoot a Titan Massager chair that is connected to power but not working?
If your Titan Massager chair is connected to the power supply but isn't working, take these steps: 1. Check that the power plug is correctly connected and the outlet is working. 2. Ensure the massage chair switch is in the “I” position.
Starts and stops the massage chair, returning rollers to original position.
Adjusts massage time intervals in a sequence of 5, 10, 15, 20, 25, 30 minutes.
Activates Zero-G1 and Zero-G2 positions, with a third press to stop the function.
Continuously press to adjust backrest to a comfortable position and release to confirm.
Continuously press to adjust footrest to a comfortable position and release to confirm.
Includes Comfort, Stretch, Healthcare, Relax, and Full Air auto programs with manual height adjustment.
Cycles through Kneading, Swedish 1, and Swedish 2 massage functions.
Cycles through Tapping 1, Tapping 2, Shiatsu 1, and Shiatsu 2 massage functions.
Cycles through Clapping 1, Clapping 2, and Rolling massage functions.
To Next Page
General
