Need help?Do you have a question about the Titan TTB278SDS and is the answer not in the manual?
General| Power | 800 W |
|---|---|
| Impact Rate | 0-5000 bpm |
| Chuck Type | SDS Plus |
| Drilling Capacity in Concrete | 26 mm |
| Drilling Capacity in Steel | 13 mm |
| Drilling Capacity in Wood | 30 mm |
| Sound Power Level | 100 dB |
| Sound Pressure Level | 89 dB |
This TITAN. product carries a guarantee of 2 years. If your product develops a fault within this period, you should in the first instance contact the retailer where the item was purchased.
Explains safety clutch mechanism for drill bit jamming.
Covers handle security, grip, stable footing, and safe operating height.
Guidelines for a clean work area and essential electrical safety precautions.
Emphasizes operator alertness, common sense, and PPE use.
Proper use, disconnection, storage, and maintenance for safety and longevity.
Guidelines for servicing the power tool by qualified personnel.
Specific safety points for hammer use, including hearing, handles, and dust.
Caution against exposure to toxic materials and dust during operation.
Details vibration levels for models and guidance on emission values.
Explains how actual vibration can differ from declared values.
Tips for reducing vibration exposure, including tool maintenance and work scheduling.
Details about double insulation safety feature and the torque limiter function.
Explanation of common safety, disposal, and conformity symbols used in the manual.
Voltage, power, speed, impact rate, drilling capacity, chuck type, protection class, weight.
Details sound pressure/power levels and when ear protection is required.
Lists standard accessories and those specific to TTB278SDS/TTB279SDS models.
Defines the machine's purpose for hammer drilling and light chiseling.
Steps for securely attaching the auxiliary handle and setting the depth gauge.
Instructions for inserting, removing SDS tools, and using the key chuck.
How to use the variable speed switch and select drilling or hammer functions.
Using the hammer-only mode for chiseling and deploying the dust cover.
Checking and topping up grease in the grease box as per usage intervals.
Advice on drill bits, pressure, angles, and safety gear for optimal performance.
Guidance on cleaning, storage, and replacing damaged supply cords.
Instructions for correctly wiring a new plug and fuse replacement.
Lists directives, standards, and signatory details for product conformity.
To Next Page
