Need help?Do you have a question about the Titan TTB279SDS and is the answer not in the manual?
General| Power | 800 W |
|---|---|
| No Load Speed | 0-1100 rpm |
| Chuck Type | SDS Plus |
| Drilling capacity in concrete | 26 mm |
| Drilling capacity in steel | 13 mm |
| Drilling capacity in wood | 30 mm |
| Voltage | 220-240V |
| Frequency | 50 Hz |
| Impact Rate | 0-3900 bpm |
Comprehensive safety guidelines for operation, electrical safety, and personal protection.
Specific safety precautions for hammer use and health advice on dust.
Practical tips for operation and essential maintenance procedures.
Defines usage, installing handles, depth gauge, and SDS tools.
Explains variable speed, hammer drill, drilling, and chisel functions.
Instructions for dust cover, lubrication, and basic upkeep.
Declared vibration emission and noise levels.
Key specifications like voltage, power, speed, and drilling capacity.
List of accessories provided with the tool.
Explanation of common symbols and conformity declarations.
Guidance on UK plug replacement and technical file holder information.
To Next Page
