13
SEE TECHNICAL SPECIFICATIONS IN THE INSTRUCTION MANUAL FOR
THE VIBRATION LEVELS OF YOUR TOOL.
The declared vibration emission value should be used as a minimum level and
should be used with the current guidance on vibration.
Calculating the actual period of use can be difficult and the HSE website has
further information.
The declared vibration emission value has been measured in accordance with a
standardised test and may be used to compare one tool with another.
The declared vibration emission value may also be used in a preliminary
assessment of exposure.
WARNING! The vibration emission value during actual use of the
power tool can differ from the declared value depending on the ways
in which the tool is used:
• How the materials are grinded, cut or drilled.
• If the tool is in good condition and well maintained.
• Use correct accessory for the tool and ensure it is sharp and in
good condition.
• The tightness of the gripping handles.
• The tool is being used as intended by its design and these
instructions.
While working with this power tool, hand/arm vibrations occur. Adopt
the correct working practices in order to reduce the exposure to
vibration. This tool may cause hand-arm vibration syndrome if its use
is not adequately managed.
TTB879GRD by TITAN
To Next Page
