30
Product functions
Intended use
This angle grinder
TITAN TTB879GRD
is designated with a rated input of 2000
Watts.
This product is intended for grinding and cutting-off applications with bonded
abrasive wheels on metal, stone or similar materials.
Depending on the intended application the respective safety guard and wheel
must be attached to the product. It is not intended for polishing, sanding or
operation with metal brushes. Do not work on soft materials like wood, wood
similar materials, soft metal like aluminium or lead.
The product may be used for dry operation only without water or other cooling
liquids
For safety reasons it is essential to read the entire instruction manual before first
operation and to observe all the instructions therein.
Switching on/off
1. Push forward the lock-off button (8) and hold it in position (Fig. 17, step 1).
2. Press the on/off switch (7) to switch the product on (Fig. 17, step 2). Release
the lock-off button (8) afterward.
3. Release the on/off switch (7) to switch the product off.
Fig. 17
1.
2.
5
8
7
TTB879GRD by TITAN
To Next Page
Loading...
