EN
TTI855PRW by TITAN
Before you start
started...
22
Battery pack and charger
NOTE: It is normal for the battery pack and charger to become warm
(but not hot) during charging process.
4. When the battery pack is fully charged, disconnect the charger from the
power supply.
5. Keep the charger in position with one hand. Press the unlocking button (6c)
(Fig. 5) and pull the battery pack out.
Attaching
1. Align the groove on the battery pack (6) with the corresponding ribs in the
receptacle (2a) of the spray gun (2).
2. Insert the battery pack (6) until it is securely locked in position (Fig. 6).
2a
2
6c
6
Fig. 6
Detaching
1. Press the unlocking button (6c) and pull the battery pack out.
Water supply
With water hose (self-priming)
The self-priming feature allows the product to draw water from an alternative
water source such as a rain water cistern instead of a water supply main.
NOTE: Pay attention to the amount of water in the water source to
dry.
1. Attach one end of the water hose (9) onto the water inlet adaptor (7) and then
MNL_TIT_GB_18 V Handheld pressure washer_GB_V1_211101.indd 22 11/1/21 2:52 PM
To Next Page
Loading...
Need help?
General
