Titan TTI855PRW - Wood and Vinyl Decks Cleaning; Cement Patios, Stone, and Brick Cleaning; Cars, Boats, and Motorcycles Cleaning; After Use Procedures

EN
29
EN
In
more
detail...
TTI855PRW by TITAN
Operation
4. Effective washing depends on both the pressure and volume of the water
used, to the same degree.
5. Begin by spraying in a testing area free and clear of people and objects.
Wood and vinyl decks
1. Reduce your work area to smaller sections and clean each section one at a
time for optimal results.
2. Rinse at high pressure using fan spray, keeping the nozzle at least 15 - 25 cm
from the cleaning surface.
3. Maintain a further distance from the cleaning area when using jet spray.
4.
Cement patios, stone, and brick
1. Rinse at high pressure using fan spray in a sweeping motion, keeping the
nozzle at least 7 - 15 cm from the cleaning surface.
2. Maintain a further distance from the cleaning area when using jet spray.
Cars, boats, and motorcycles
1. Clean one side at a time to achieve the best results.
2. Rinse at high pressure using fan spray in a sweeping motion, keeping the
nozzle at least 20 cm from the cleaning surface. Do not use narrow pencil jet
on vehicle or boat paint work.
3.
4.
After use
1. Release the on/off switch (5) (Fig. 12).
2. Remove the battery pack (6).
5
6
Fig. 12
3. Disassemble the water hose. Turn off the water tap.
4. Check, clean and store the product as described below.
MNL_TIT_GB_18 V Handheld pressure washer_GB_V1_211101.indd 29 11/1/21 2:52 PM