Titan TTT817GBC User Manual (English)

Questions and Answers:

A
Angela GutierrezAug 7, 2025
What to do if my Titan TTT817GBC Brush Cutter does not start?
- B
  belinda73Aug 7, 2025
  If your Titan Brush Cutter doesn't start, there are several potential causes: * The battery pack might not be properly attached; ensure it is securely attached. * The battery pack could be discharged; remove it and charge it. * The battery pack might be damaged; replace it with a new one of the same type. * There may be another electrical defect; in this case, have it checked by a specialist electrician.
D
davisrobertAug 15, 2025
Why is my Titan Brush Cutter not reaching full power?
- C
  Christina CookeAug 15, 2025
  If your Titan Brush Cutter isn't reaching full power, it could be due to the following reasons: * The battery pack capacity might be too low; charge the battery pack. * The air vents might be blocked; clean the air vents.
A
Andrea BlackAug 22, 2025
Why does my Titan TTT817GBC Brush Cutter have excessive vibration or noise?
- H
  Henry PettyAug 23, 2025
  Excessive vibration or noise in your Titan Brush Cutter can be caused by: * A damaged trimmer head; replace it with a new one. * A damaged cutter blade; replace it with a new one. * Loose bolts/nuts; tighten them. * Worn/damaged trimming line; replace it with a new one.
R
robinsonkennethAug 30, 2025
How to fix an unsatisfactory cutting result with my Titan Brush Cutter?
- C
  Connie BlankenshipAug 30, 2025
  An unsatisfactory cutting result with your Titan Brush Cutter may be due to: * A worn or damaged trimming line; replace it with a new one. * A worn or damaged cutter blade; replace it with a new one.

Titan TTT817GBC Specifications

General

Engine Type	2-stroke
Engine Size	25.4 cc
Engine Displacement	25.4 cc
Power Output	1.5kW
Cutting Width	25cm
Weight	7.5kg
Shaft Type	Straight
Line Diameter	2 mm

Summary

Getting Started

Safety Information

Comprehensive safety warnings and guidelines for product use and personal protection.

Your Product

Detailed overview of the brush cutter's parts, components, and their identification.

Before You Start

Instructions on unpacking, checking contents, and initial assembly steps.

In More Detail

Product Functions

Describes the intended use of the brush cutter with different attachments and operational limits.

Operation

Guidance on general operation, cutting techniques, and trimming methods.

Care and Maintenance

Procedures for cleaning, maintaining, and inspecting the product for optimal performance.

Troubleshooting

Identifies common problems, their possible causes, and solutions for the product.

Recycling and Disposal

Guidelines for the proper disposal of electrical products and battery packs.

Guarantee

Information regarding the manufacturer's warranty, terms, conditions, and claims.

Technical Specifications

Lists technical data including voltage, weight, dimensions, and sound/vibration levels.

Declaration of Conformity

Statement confirming the product's compliance with relevant European directives.

Titan TTT817GBC User Manual

Table of Contents